Akitio NT2 U3 Bedienungsanleitung PDF herunterladen (Seite 3)

NT2 U3 Introduction

[2]

1.5 Detailed View

Front View Rear View

1.5.1 LED indication

LED

Status

• Blue = Power on

HDD

A & B

• Green = Status OK, USB connection to computer is established

• OFF = Empty drive bay or USB connection is not yet established

• Flashing Green = Data access (read/write)

• Blinking slow (500ms on/off) = Drive failure (error)

•

Blinking fast (125ms on/off) = Rebuilding RAID 1 array

Note

In order to determine which type of blinking the LED indicates, stop transferring files to or from

the hard drives. The slow blinking will be slower and the fast blinking will be faster than the

usual flashing of the LED during data access.

1.5.2 RAID switch

DIP Switch

RAID Mode

Non-RAID

Switch position: 1 OFF, 2 OFF

RAID 0 - Striping

Switch position: 1 ON, 2 OFF

RAID 1 - Mirroring

Switch position: 1 OFF, 2 ON

Note

Except for the Non-RAID mode, two hard drives are required. After changing the RAID mode,

press the button above the RAID switch to confirm the new setting.

Changing the RAID mode

requires formatting the

drives

. Make sure to

backup all existing data

first!

Fan

Confirm RAID mode

RAID switch

Kensington security slot

USB 3.0 port

Power switch

Power receptacle

1 2 3 4 5 6 7 8 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Akitio NT2 U3 Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern